HONDA CHROME RISERS

Aeromach's selection of Honda motorcycle accessories are made from 6061-T6 extruded billet aluminum that is polished and chrome plated. All of our Honda parts are made to install easily without having to drill or cut your bike. Customizing your Honda or Cruiser is what we are all about.

These Honda Pullback Risers place your hands into a natural comfort zone by raising the bars 2" and putting your grip point 1-1/2" closer to you, while allowing you to retain your stock throttle and brake cables. Our Pullback Risers come with their own "split caps" for mounting, but the original Honda top clamp will fit. The Pullback Risers are simple to install and best of all, do not require any drilling of the triple clamps! All stainless steel hardware is included. Fits all Valkyrie, the old 1100 Aero and the new 750 Aero, Magna, Sabre and VLX 600 models. Will fit old Aero 1100 with Memphis Shades windshield. Choose the correct application when checking out. NOTE: Sabre will need longer cables

HONDA PULLBACK RISERS $139.95/pair

---

Fatty Pullback Risers for 1 1/4" Fat Bars

Did you ever want to use a 1.25" handlebar on your bike but could get it to work because the riser spread on your metric bike was wider than American bikes? We thought those thick bars would look great so we stepped this special riser to fit all varieties of 1.25" handlebars, whether they are White Bros Burly Bars, Wild 1 chubbys or Drag specialties, our risers will make them work. Pictured is a 1.25" White Bros Burly Bar-Classic

AM-4320C 4" FATTY PULLBACK RISERS $139.95 ea.

---

6 inch Pullback Risers for VTX in polished finish 

Looking for more comfort in your riding position? Try our 6" CNC machined, custom billet aluminum risers for the VTX. They bolt on easily and are made to accept the stock speedo housing. To install them simply unbolt the stock risers from below the triple tree and unscrew the four allen head bolts from the speedo housing on the top. Install the Aeromach risers using the bolt kit we provide and replace the stock speedo housing using the stock bolts.

The 6" risers are polished aluminum to match the stock housing. The pullback is 1 1/2" and raises the handle bars 1 1/8" up. Stock control cables and wiring will work fine.

AM-3490P VTX MOTORCYCLE 6" PULLBACK RISERS $134.95 Pair

Two polished aluminum caps for the AM-3490P risers. Normally the AM-3490P is used in conjunction with the stock VTX 1800C speedo. However, we designed this kit for riders who have deleted the stock speedo and want to retain their 6" risers. We are happy to accommodate.

Comes with 4 new screws for mounting.

AM-3495P RISER CAP SET For AM-3490P $24.95 Pair

7 inch "Chopper Risers" for Honda

Looking for risers that have attitude? Chances are, if you wanted a chopper style riser, you had to buy a set that were made for HD and you had to modify your bike. We designed these risers to bolt right on to metric bikes with M12 bolts. They work extremely well with 18, 25 & 35 degree drag bars in 1 inch diameter.

For most bikes, longer control (clutch and brake) cables will be needed depending on the drag bar you select. Installation is simple and the top bolts are concealed by the cap. You select your style of caps: "Dome" or the radical "Tribal". The 7" risers are chrome plated and made from extruded billet aluminum. Come with hardware for installation.

Please indicate which Honda model you own!

AM-3900C 7-INCH CHOPPER RISERS WITH DOMED CAP $139.95 Pair
AM-3910C 7-INCH CHOPPER RISERS WITH TRIBAL CAP $139.95 Pair
AM-3900C 7-INCH CHOPPER RISERS WITH SPIKED CAP $139.95 Pair

6 Inch Pullback Risers - Long Necks

Not happy with your equipment? Are your parts lacking in length? If 4 inches of rise is just not enough for you and your passenger, then we have your aid. Aeromach has added 2" to make a 6" pullback riser that works with factory cables. These risers come way back and were designed to work on VTX 1800R, 1300 R & 1300 C models. The control cables for Retro models need to be longer if using stock bars. No cable change when using drag bars on 1800R. Stock cables will work for the 1300 C model. For the 1300 C model you will gain 1" up and 1" back. If you use the 35 degree drag bars we sell, you will gain approx. 3" closer to you and still use the stock cables. Overall, the 6" pullback risers work great with drag bars.
	VTX 1300 C
6" Risers with 35 degree drag bar on VTX 1300C

AM-3680C 6" PULLBACK RISERS FOR VTX 1800R $149.95
AM-3620C 6" PULLBACK RISERS FOR VTX 1300C $149.95

Reaper Top Clamp

AM-3570C VTX MODELS $54.95

Aeromach Manufacturing
11423-B Woodside Ave.
Santee, CA 92071
619-258-5443
Information: infoandquestions@aeromach.net