Cruisin' Pegs for Yamaha Road Star, Royal Star & V Star
Finally, a highway peg system that does not have to mount
to the engine guards. Stretch out and have a more comfortable riding position by placing your feet up on the cruisin pegs while riding.
The Cruisin' Pegs are CNC machined from 6061-T6 billet
aluminum, chrome plated and designed to mount to the underside
of the OEM floorboards. Works with or without the factory crash
bar! Stainless steel hardware, a reinforcing plate and pictorial
instructions are included.
Models they fit: All Yamaha Road Star models, Royal Star,
Venture and V Star 1100 Classic with stock footboards.
Will work with Lindby Bars.
Will NOT work with aftermarket footboards.
How they work: A pivot pin feature allows for three positions:
1. Up Close (for riders 5'6" - 5'10")
2. Middle (for riders 5'11" - 6'1")
3. Way Out (for riders 6'2" - 6' 4")
You have your choice between two pegs when you order:
1. The “Spiked” footpegs, are all chrome and measure
5" long. They have a machined texture for traction and a catch
at the end to keep a rider's foot in place.
2. Round, chrome billet footpegs with rubber “bands”
are also available. Both peg designs are foldable.
Installation is easy: Remove the rubber inserts from the
footboard and lay the template onto the exposed floorboard.
Using a sharpie pen, draw two circles where the board is to
be drilled. Remove the template and use a punch to aid the drilling.
Use a 13/32 drill. Place the Cruisin’ peg assembly under
the footboard and drop the installation bolts from the topside,
through the footboard, through the Cruisin’ peg and secure
with the two split washers & nylock nuts. Replace the rubber
pads and go for a ride. Install time is approximately 45 min.
Install
Guide
 
 
AM-9280C Yamaha Chrome Floorboard Cruisin'
Pegs with Solid Style Arms $268.90 pair
AM-9290C Yamaha Chrome Floorboard Cruisin' Pegs with Flame Style
Arms $268.90 pair
AM-9300C Yamaha Chrome Floorboard Cruisin' Pegs with Tribal
Style Arms $268.90 pair
AM-9460C Yamaha Chrome Floorboard Cruisin' Pegs with Ballnose Arms $268.90 pair
|
Flame Levers for Yamaha Road Star / Warrior
These flame levers replace the factory levers easily and look great on your
bike. The edges of the levers are rounded so they are comfortable to
squeeze. CNC machined from T6 extruded billet aluminum with show polish
finish to match the stock hand controls. Designed to mount to all Road Star & Warriors with factory controls. Simple to install.
AM-8080P Flame Levers for Yamaha Road Star & Warrior $139.95 pair
AM-8090P Flame Levers for Yamaha V Star 1100 $139.95 pair
Pistol Grip
Levers for Yamaha
 
AM-7900P Pistol Grip Levers for Yamaha Road Star & Warrior $139.95
AM-7920P Pistol Grip Levers for Yamaha V Star 1100 $139.95
Floorboard
Cruisin' Pegs
You'll have three comfortable positions for your feet while
you ride with our new Cruisin' Floorboard Pegs. Besides the traditional
floorboards for flat feet position, you can bridge the floorboard and
Hiway Peg with your heel/toe or you can extend your leg with your foot
firmly on the pegs.
The Cruisin' Floorboard Pegs mount to your stock running boards,
are chrome plated to match the brake and shift lever and will not
conflict with engine guard bars. Pegs also retract for safety or for
maneuvering in tight areas. Heavy-duty construction utilizing laser
and CNC technology. A must for long rides!
Fits Yamaha Road Star, Royal Star, RS Venture and V-Star 1100 Classic.
Please note: Cruisin' Floorboard Pegs work best for riders 5'-9"
and above.
AM-5330C FLOORBOARD CRUISIN' PEGS for YAMAHA MODELS $194.95/pair
4"
PullBack Risers
These PullBack Risers for Yamaha motorcycles place your hands into
a natural comfort zone by raising the bars 2" and putting your grip
point 1-1/2" closer to you, while allowing you to retain your stock
throttle and brake cables (except 01 & newer V-Star 1100 - longer
cables required).
Our PullBack Risers come with their own "split caps" for mounting.
The PullBack Risers are simple to install and best of all, do not
require any drilling of the triple clamps!
All stainless steel hardware is included. Fits all Yamaha Road Star
, V-Star 1100, and VSTAR 650 models. Choose your application below.
AM-4150C PULLBACK RISERS FOR YAMAHA MOTORCYCLES-to order, call 800 990-9392 or 619 258-5443
AM-4130C PULLBACK RISERS for YAMAHA- V-Star 1100, VSTAR 650 $139.95
Chrome Motorcycle Bullets 
Conceal that unsightly front axle in a new and stylish way. Slide Aeromach's Fork Bullets over the bottom of the fork slider and simply tighten two set screws. Sleek design. Extreme eye catcher!
AM-5000 Bullets fit all Yamaha Royal Star, Road Star, V-Star 1100 and Venture bikes.
AM-6000 Bullets fit all Yamaha V-Star 650 bikes.
AM-5000 CHROME MOTORCYCLE BULLETS for <YAMAHA-RS/RD/V-S 1100 $139.95/pair
AM-6000 CHROME MOTORCYCLE BULLETS for YAMAHA- V-STAR 650 $139.95/pair
Master Cylinder Covers for Yamaha
These CNC machined, chrome-plated aluminum covers replace your generic
stock master cylinder covers. Comes complete with stainless-steel button
head replacement screws.
Available in your choice of smooth or milled finish.
Will Not fit V - Star 1100 or 650.
Royal Star
AM-5080C YAMAHA MASTER CYLINDER COVER - smooth
$43.95/pair
AM-5080CM YAMAHA MASTER CYLINDER COVER - milled
$43.95/pair
Yamaha Road Star
AM-5085C YAMAHA MASTER CYLINDER COVER - smooth
$22.95/ea
AM-5085CM YAMAHA MASTER CYLINDER COVER - milled
$22.95/ea
Diamond Master Cylinder Covers
New "diamond-cut" master cylinder cover design!
AM-5080DC YAMAHA DIAMOND MASTER CYLINDER COVER - Royal Star
$43.95/pair
AM-5085DC YAMAHA DIAMOND MASTER CYLINDER COVER
- Road Star $22.95/ea
Chrome Fusion Master Cylinder Clamps
Chrome Fusion replaces your ugly, stock grey master cylinder
clamp.
Some bikes will require two Chrome Fusion clamps. Make your selection
below (Note: does not fit Royal Star).
AM-9930C CHROME FUSION CLAMPS FOR YAMAHA- pair
$54.95
AM-9935C CHROME FUSION CLAMP FOR YAMAHA-single
$32.95
Fatty Pullback Risers for 1 1/4" Fat Bars 
Did you ever want to use a 1.25" handlebar on your bike but couldn't get it to work because the riser spread on your metric bike was wider than American bikes? We thought those thick bars would look great so we stepped this special riser to fit all varieties of 1.25" handlebars, whether they are White Bros Burly Bars, Wild 1 chubbys or Drag specialities, our risers will make them work. Pictured is a 1.25" White Bros Burly Bar-Classic.
Fits Road Star Only
AM-4320C 4" FATTY PULLBACK RISERS $139.95 ea.
LED Replacement for Stock Yamaha Road Star/V Star Tailight 
128 total Red LED's and 3 white. You have your choice of replacing the Tail/Brake light only or upgrading and having the LED also become your left and right turn signal. How this happens is by using 40 of the LED's to flash left when you operate the turn signal. 40 LED's are also dedicated to the right. This gives you the option of removing your stock, rear turn signals. Check with local traffic laws before modifying your bike. The remaining 48 LED's operate as the center brake. Both LED replacement boards fit into the stock tailight/lens.
AM-4470 BRAKE/RUNNING LIGHT ONLY $124.95 ea.
AM-4480 TAILIGHT, BRAKE LIGHT AND TURN SIGNALS $134.99 ea.
Reptile Brake/Clutch Reservoir Covers
The Reptile brake/clutch Reservoirs have the texture machined in!
AM-5085RPTC Single Cover $22.95
AM-5080RPTC Pair $43.95
Flame Brake/Clutch Reservoir Covers
Now fits VStar 1100
 Comes complete with two stainless-steel button head replacement screws for ultra-clean look! Available in singles-$20.95 or pairs- $41.95 depending on your bike. Please check the hand controls on your metric bike to determine if you have a manual clutch or hydralic. A single cover is all that is needed for manual and a pair for bikes with hydralic clutches and brakes.
*Note, will not fit: 96' & older Honda models.
AM-5085 FLC Road Star Single Cover $22.95
AM-5080FLC Royal Star Pair $43.95 Pair
AM-5140C VStar 1100 Single Cover $22.95 ea
Star Brake/Clutch Reservoir Covers
 We asked our parts designer to come up with yet another billet, "Star" part and this was his creation. The cover replaces your generic stock master cylinder cover and comes complete with stainless-steel button head replacement screws. Sold in singles only. Fit all Road Star models.
AM-5085STARC Brake/Clutch Reservoir Covers for Road Star $22.95 ea
AM-5080STARC Brake/Clutch Reservoir Covers Royal Star $43.95 pair
Vertical License Flame Accent
Made from polished stainless steel. This wicked flame bolts to the bottom, backside of the license frame and hangs down. A must for a bike with a flame paint theme.
AM-2490SSP VERTICAL MOTORCYCLE LICENSE FLAME ACCENT $31.45 ea.
Biker for Life License Frame
 "Ride Hard, Ride Free....Biker For Life"
This chrome frame is machined from T6 aluminum and fits all license plates that measure 7"L X 4"W. Comes complete with stainless steel mounting hardware.
AM-2455C Biker For Life License Frame $59.95 ea
LED Illuminated License Frame  This machined license plate holder is chrome plated and has a full spectrum LED that gives a clean look to your license assembly. Fits all license plates that measure 7"L X 4"W.
AM-2485CLED LED License frame $119.95 ea.
35 Degree Drag Bar with 1" Diameter 
-
35 degree bend
-
12" of pullback
-
8" Center
-
28.5" Width
Chrome Handlebar without knurls or dimples - cannot run cables through bars.
AM-3700C 35 DEGREE BEND HANDLEBAR FOR YAMAHA $94.95 ea
Star Billet Brake Pedal 
We asked our parts designer to come up with a billet brake pedal for the Star and this was his creation. This chromed, billet aluminum brake pedal measures 5" Long X 2" Tall and installs easily. Simply peel off the stock rubber and slide the Star Billet Pedal in place. Lock down the four set screws on the back side and you are ready to go.
For Road Star only. V Star coming soon.
AM-4245C BRAKE PEDAL FOR YAMAHA $65.45 ea
Billet Warheads for Front Axle Concealment
 Drop
the bomb! The next generation has arrived. Are you ready?
These mean little monsters slide over your forks and are designed
to portray aggressive, unruly and unsocial behavior. Forget what everybody
else is bolt'n on their bike! You lead the trend.
Guaranteed to make em circle and stare at the next rally.
Warheads are machined from extruded billet aluminum and chrome
plated.
They bite on with two set screws per part.
Fits Road Star, Royal Star, V Star 1100.
Come in Smooth and Speed Milled.
AM-3750C SMOOTH BILLET WARHEAD $139.95 pair
AM-3650C SPEED MILILED BILLET WARHEAD $139.95
pair
Tailspikes
now available for V Star & Road Star
 Aeromach's
Tail Spikes are made of polished stainless steel and thread into the
fender strut replacing the stock allen head bolts. They keep the curious
from getting too close!
AM-8290SSP Stainless Steel Tailspikes
$54.95 set
7 inch "Chopper
Risers" for Yamaha
Looking for risers that have attitude? Chances are, if you wanted
a chopper style riser, you had to buy a set that were made for HD
and you had to modify your bike. We designed these risers to bolt
right on to metric bikes with M12 or M10 and we supply the hardware.
They work extremely well with 18, 25 & 35 degree drag bars in
1 inch diameter.
For most bikes, longer control (clutch and brake) cables will
be needed depending on the drag bar you select. Installation is simple
and the top bolts are concealed by the cap. You select your style
of caps: "Dome" or the radical "Tribal". The 7" risers are chrome
plated and made from extruded billet aluminum. Come with hardware
for installation.
AM-3900C YAMAHA MOTORCYCLE RISERS with Domed Cap $139.95
Pair
AM-3910C YAMAHA MOTORCYCLE RISERS with Tribal Cap $139.95
Pair
AM-3905C YAMAHA MOTORCYCLE RISERS with Spiked Cap $139.95
Pair
6 Inch
Pullback Risers - Long Necks
 Not
happy with your equipment? Are your parts lacking in length? If 4
inches of rise is just not enough for you and your passenger, then
we have your aid. Aeromach has added 2" to make a 6" pullback riser
that works with factory cables. They work great with drag bars.
AM-3630C 6 inch Pullback Risers for Road Star $149.95
pair
Tribal Flame Grips
 Tribal Flame Grips made from solid T6 billet aluminum. These billet grips are chrome plated and have a unique tribal flame pattern. The caps at the end are threaded and can be removed to add a mirror to the end of the left grip.
AM-2350C Tribal Flame Grips $124.95 Pair
Smooth Grips
 The Billet Grips are made from solid T6 billet aluminum. These machined grips are chrome plated and perfectly smooth. The caps at the end are threaded and can be removed to add a mirror to the end of the left grip with Aeromach's "Grip End" piece. The billet grips are for 1" diameter handlebars and fits almost all metric cruisers. The stock handlebars on metric bikes are 1" diameter.
AM-2400C Smooth Motorcycle Grips $124.95 pair
Grip End piece for Mounting Mirrors to Aeromach Grips
 The Grip End piece allows you to add an Aeromach mirror to the end of your Aeromach grip (left side only). Simply remove the threaded cap from the left side and thread on the Grip End pc. Then select an Aeromach mirror to attach to the end of your grip. We find that the small oval, large oval, classic round and street fighter look the best.
*Note, mirrors are sold seperately.
AM-2285LC Grip End for mounting Aeromach motorcycle mirrors (left) $48.95
|
Not
happy with your equipment? Are your parts lacking in length? If 4
inches of rise is just not enough for you and your passenger, then
we have your aid. Aeromach has added 2" to make a 6" pullback riser
that works with factory cables. They work great with drag bars. 
Tribal Flame Grips made from solid T6 billet aluminum. These billet grips are chrome plated and have a unique tribal flame pattern. The caps at the end are threaded and can be removed to add a mirror to the end of the left grip.
The Billet Grips are made from solid T6 billet aluminum. These machined grips are chrome plated and perfectly smooth. The caps at the end are threaded and can be removed to add a mirror to the end of the left grip with Aeromach's "Grip End" piece. The billet grips are for 1" diameter handlebars and fits almost all metric cruisers. The stock handlebars on metric bikes are 1" diameter.
The Grip End piece allows you to add an Aeromach mirror to the end of your Aeromach grip (left side only). Simply remove the threaded cap from the left side and thread on the Grip End pc. Then select an Aeromach mirror to attach to the end of your grip. We find that the small oval, large oval, classic round and street fighter look the best.
