HONDA CHROME MOTORCYCLE PARTS

Aeromach's selection of Honda motorcycle accessories are made from 6061-T6 extruded billet aluminum that is polished and chrome plated. All of our Honda parts are made to install easily without having to drill or cut your bike. Customizing your Honda or Cruiser is what we are all about.

---

Extreme VTX License Frame

A killer chrome license frame with the VTX model branded on. Machined from billet aluminum. Fits all license plates that measure 7"L X 4"W. Fits Honda VTX 1800 & 1300 Retro models only. AM-2465C Extreme VTX License Plate Frame $59.95 ea

Biker for Life License Frame

"Ride Hard, Ride Free....Biker For Life"

This chrome frame is machined from T6 aluminum and fits all license plates that measure 7"L X 4"W. Comes complete with stainless steel mounting hardware.

AM-2455C Biker For Life License Frame $59.95 ea

LED Illuminated License Frame

This machined license plate holder is chrome plated and has a full spectrum LED that gives a clean look to your license assembly. Fits all license plates that measure 7"L X 4"W.

AM-2485CLED LED License frame $119.95 ea.

Honda VTX Retro 1800 Chrome License Frame

Retro 1800"! Now the competition can read what just passed them. Made from chrome billet aluminum. Fits all license plates that measure 7"L  X 4"W.

AM-2495VTXRC $59.95

VTX Retro Laydown Back Plate

Made from polished stainless steel. Fits VTX 1300, VTX 1800 Retro, and all license plates that measure 7"L X 4"W.

Frame not included.

AM- 4380SSP VTX RETRO LAYDOWN BACK LICENSE PLATE $54.95

Honda VTX Extreme 1800 Chrome License Frame

AM-2475EXC HONDA VTX 1800 MOTORCYCLE LICENSE PLATE FRAME $59.95 ea.

---

Honda VTX Vertical Sidemount Tag Holder

The stock license plate assembly is the most detestable thing on a VTX. Not only is it ugly, but it also hides that beautiful fat rear tire! Aeromach has the cure - our stainless steel, Vertical Sidemount Tag (VST) holder that sits on the left side of the bike and utilizes the stock license lamp.

In this kit you will get the VST, new wires to run the stock license lamp and all hardware necessary to install. And you won't have to be a wizard mechanic to assemble it all!

Now that you've completed surgery on your stock license plate, we have a cover to hide that mutant piece of metal Honda welded (yes, welded!) to the rear fender. Our Rear Plate Replacement (RPR) cover is polished stainless steel and installs easily. Best of all, it's included in the VST kit!

Chrome license frame is not included but available from your local Honda dealer

Fits Honda VTX 1800 & 1300 C model.

AM-8300SSP HONDA VERTICAL SIDEMOUNT TAG HOLDER $214.95

---

Rear Replacement Cover

If you have a sidemount license plate and need to hide that mutant piece of metal Honda welded (yes, welded!) to the rear fender, then check out our Rear Plate Replacement (RPR). It is polished stainless steel and installs easily. Comes complete with two button head screws to mount. Made to work with stock turn signals.

AM-8230SSP REAR REPLACEMENT COVER FOR HONDA VTX 1800/1300 C $23.95 ea

---

Tail Spikes for VTX

Our accessory designer at Aeromach has a penchant for sharp objects. When he was off his ritalin, he created these sinister little objects for the rear fender struts. Aeromach's Tail Spikes are made of polished stainless steel and thread into the VTX fender strut replacing the stock allen head bolts. They keep the curious from getting too close! Tail Spikes will fit Retro model.

Sold in sets of 6 only.

AM 8900SSP VTX TAIL SPIKES $82.95/set

---

Stainless Steel License Back Plate

Fits all states except: CO, LA, MA, MD, NJ, OH, PA, RI, WI, WY, due to larger size. Installs easily using the stock bolts.

AM-8250SSP LICENSE BACK PLATE $54.95

---

"V" Stacks for Valkyrie

Attitude - radical and unique, like you would expect from Aeromach! Make the ultimate muscle bike bulge like it's on steroids by attaching our "V" Stacks to your Valkyrie. CNC machined from extruded billet aluminum, then generously bathed in chrome.

Click here to see the V-Stack manufacturing process!

Aeromach's "V" Stacks are for esthetic value only and do not alter engine dynamics. Stacks mount using the three stock phillips head screws, but dealer installation is recommended. Sold in a set of six. Patent Pending.

AM-2410HC VALKYRIE "V" STACKS $249.95/set

Honda parts fit models: Aero, VTX 1300 Custom & Retro, VLX 600, Up to 01' Sabre, Up to 99' Valkyrie. Includes special bolt kit for Honda applications.

AM-5000C HONDA CHROME BULLETS $149.90/pair

---

Extreme Chrome License Frame

M

AM-2470EXC EXTREME CHROME MOTORCYCLE LICENSE FRAME $59.95 ea.

---

Vertical License Flame Accent

Made from polished stainless steel. This wicked flame bolts to the bottom, backside of the license frame and hangs down. A must for a bike with a flame paint theme.

AM-2490SSP VERTICAL MOTORCYCLE LICENSE FLAME ACCENT $31.45 ea.

---

VTX Cruisin' Pegs for Retro 1800 & 1300

You'll have three comfortable positions for your feet while you ride with our new Floorboard Cruisin' Pegs for the Honda VTX Retro 1800 & 1300. Besides the traditional floorboards for flat feet position, you can bridge the floorboard and Hiway Peg with your heel/toe or you can extend your leg with your foot firmly on the pegs.

The Floorboard Cruisin' Pegs mount to your stock running boards and can have two different locations to mount with a difference of .75" apart. They are chrome plated to match the brake and shift lever. The Pegs also retract for safety or for maneuvering in tight areas. Heavy-duty construction utilizing laser and CNC technology. A must for long rides!

Note, the pegs work best for riders who stand 5'8" and above. The FCP are designed to flex with the floorboard.

Fit stock Honda running boards only.

Not designed to support the full body weight of a rider "standing on the pegs".

AM-7330C VTX 1800 & 1300 CRUISIN PEGS $194.95 pair

---

VTX Cruisin' Pegs

Now you can kick back in comfort with the new Crusin' Pegs for the VTX. These high quality, CNC machined pegs are chrome plated and have a textured surface for foot grip. The pegs are attatched to chromed steel brackets that bolt directly on to the two hex head bolts located in front of the foot pegs. The Cruisin' Pegs will work with Aeromach brand Floorboards. The Cruisin' Pegs will NOT work with Engine Guards, no matter what.

Installation is simple. Remove one hex head bolt at a time and replace by passing bolt through Cruisin' Peg bracket. Adjust peg angle to your comfort. The pegs will fold up in tight spots.

Fits Honda VTX 1800 Custom only

Cruisin Peg Measurements:
Place feet 4" Forward
Out 11" from bike to the end of the foot peg.
The foot peg is 6.25" long

AM- 6330C MOTORCYCLE CRUISIN' PEGS $194.95 pair

---

 

Brake Pedal for Retro 1800

Flame Brake Pedal for VTX 1800 & 1300 Retro

Chrome billet brake pedal that replaces the OEM rubber. The pedal measures 5.75" L X 3" W and secures in place by sliding over the brake arm and tightens with set screws. The tribal flame design is machined in and matches the grips & brake reservoir covers.

AM-4390FLC FLAME BRAKE PEDAL COVER $65.45 ea.

Billet Warheads for Front Axle Concealment

Drop the bomb! The next generation has arrived. Are you ready?

These mean little monsters slide over your forks and are designed to portray aggressive, unruly and unsocial behavior. Forget what everybody else is bolt'n on their bike! You lead the trend.

Guaranteed to make em circle and stare at the next rally.

Warheads are machined from extruded billet aluminum and chrome plated.

They bite on with two set screws per part.

Honda parts fit models: Aero, VTX 1300, VLX 600, Up to 01' Sabre, Up to 99' Valkyrie. Includes special bolt kit for Honda applications.

Come in Smooth and Speed Milled.

Chrome Warheads & Bolt Kit $144.90 pair

Honda Valkyrie Dipstick Chrome Cover

AM-2450HC HONDA VALKYRIE DIPSTICK CHROME COVER $19.99 ea

Aeromach Manufacturing
11423-B Woodside Ave.
Santee, CA 92071
619-258-5443
Information: infoandquestions@aeromach.net