SUZUKI MOTORCYCLE ACCESSORIES Aeromach's selection of Suzuki motorcycle accessories are made from 6061-T6 extruded billet aluminum that is polished and chrome plated. All of our Suzuki parts are made to install easily without having to drill or cut your bike. Customizing your Suzuki or Cruiser is what we are all about.

NOTE: Click photos for enlargement!
install guides     How To Order

Click here for Aeromach Tshirts!

Kawasaki Mirrors

Suzuki PullBack Risers

Our PullBack Risers come with their own "split caps" for mounting. The PullBack Risers are simple to install and best of all, do not require any drilling of the triple clamps!

All stainless steel hardware is included. Choose either:
AM-4330C for Intruder 1500LC / C90 & C90T
or AM-4145C for the Suzuki Volusia / C50

AM-4330C SUZUKI PULLBACK RISERS - Intruder 1500LC / C90 & C90T $149.95/pair
AM-4145C SUZUKI PULLBACK RISERS - Volusia / C50 $159.95/pair

Blank Tail Spikes for Boulevard M95

Got spikes? The Tail Spikes replace the two allen head bolts on the fender strut and install in minutes. Designed not to interfere with the passengers leg passage.

Tail Spikes are made of polished stainless steel. They keep the curious from getting too close. Sold in sets of 4 only.

AM-8400SSP Suzuki Boulevard M95 TAIL SPIKES $54.95 set of 4

Suzuki Chrome Bullets

Conceal your unsightly front axle in a new and unique way. Simple mounting too - just slide these bullets over the fork sliders and tighten two set screws. Sleek design. Extreme eye catcher!

Fits 1500LC, Voulsia & 1400 Intruder.

AM-5000C SUZUKI CHROME BULLETS $139.95

35 Degree Drag Bar with 1" Diameter

• 35 degree bend
• 12" of pullback
• 8" Center
• 28.5" Width

Chrome Handlebar without knurls or dimples - cannot run cables through bars.

AM-3700C 35 DEGREE BEND HANDLEBAR FOR SUZUKI $94.95 ea.

Billet Warheads for Front Axle Concealment

Drop the bomb! The next generation has arrived. Are you ready?

These mean little monsters slide over your forks and are designed to portray aggressive, unruly and unsocial behavior. Forget what everybody else is bolt'n on their bike! You lead the trend.

Guaranteed to make em circle and stare at the next rally.

Warheads are machined from extruded billet aluminum and chrome plated.

They bite on with two set screws per part.

Fits 1500LC, Voulsia & 1400 Intruder.

Come in Smooth and Speed Milled.

AM-3750C SMOOTH BILLET WARHEAD $139.95 pair
AM-3650C SPEED MILLED BILLET WARHEAD $139.95 pair

---

7 inch "Chopper Risers" for Suzuki

Looking for risers that have attitude? Chances are, if you wanted a chopper style riser, you had to buy a set that were made for HD and you had to modify your bike. We designed these risers to bolt right on to metric bikes with M12 bolts. They work extremely well with 18, 25 & 35 degree drag bars in 1 inch diameter.

For most bikes, longer control (clutch and brake) cables will not be needed depending on the drag bar you select. Installation is simple and the top bolts are concealed by the cap. You select your style of caps: "Dome" or the radical "Tribal". The 7" risers are chrome plated and made from extruded billet aluminum and come with hardware for installation. Please indicate which Suzuki model you own!

Please indicate which Suzuki model you own!

AM-3900C Chopper Risers for Suzuki with Domed Cap $139.95 Pair
AM-3910C Chopper Risers for Suzuki with Tribal Cap $139.95 Pair
AM-3905C Chopper Risers for Suzuki with Spiked Cap $139.95 Pair

Tribal Flame Grips

Tribal Flame Grips made from solid T6 billet aluminum. These billet grips are chrome plated and have a unique tribal flame pattern. The caps at the end are threaded and can be removed to add a mirror to the end of the left grip.

AM-2350C Metric Tribal Flame Grips $124.95 pair

Smooth Grips

The Billet Grips are made from solid T6 billet aluminum. These machined grips are chrome plated and perfectly smooth. The caps at the end are threaded and can be removed to add a mirror to the end of the left grip with Aeromach's "Grip End" piece. The billet grips are for 1" diameter handlebars and fits almost all metric cruisers. The stock handlebars on metric bikes are 1" diameter.

AM-2400C Smooth Motorcycle Grips $124.95 pair

Grip End piece for Mounting Mirrors to Aeromach Grips

The Grip End piece allows you to add an Aeromach mirror to the end of your Aeromach grip (left side only). Simply remove the threaded cap from the left side and thread on the Grip End pc. Then select an Aeromach mirror to attach to the end of your grip. We find that the small oval, large oval, classic round and street fighter look the best.

*Note, mirrors are sold separately.

AM-2285LC Grip End for mounting Aeromach motorcycle mirrors (left) $48.95

6 Inch Pullback Risers - Long Necks

Not happy with your equipment? Are your parts lacking in length? If 4 inches of rise is just not enough for you and your passenger, then we have your aid. Aeromach has increased your fun by pumping out a total of 6 inches of chromed, billet delight.

These risers come way back and were designed specifically for your metric bike. They work great with drag bars. Yes, you will need longer control cables!

The single piece top clamp can be used on the 8 inch Long Neck Risers.

Coming Soon!

Reaper Top Clamp

Biker for Life License Frame

"Ride Hard, Ride Free....Biker For Life"

This chrome frame is machined from T6 aluminum and fits all license plates that measure 7"L X 4"W. Comes complete with stainless steel mounting hardware.

AM-2455C Biker For Life License Frame $59.95 ea.

LED Illuminated License Frame

AM-2485CLED LED License frame $119.95 ea.

Click here for Aeromach Tshirts!		Kawasaki Mirrors

Aeromach Manufacturing
11423-B Woodside Ave.
Santee, CA 92071
619-258-5443
Information: infoandquestions@aeromach.net

Order Toll Free! 800-990-9392
24-Hour Fax Line 619-258-8515